-40%

Chip Eliminator for Ricoh Ri3000 Ri6000 DTG Printer

$ 47.51

Availability: 100 in stock
  • Country/Region of Manufacture: United States
  • MPN: Chip Eliminator
  • Type: Direct to Garment Printer (DTG)
  • Condition: New
  • All returns accepted: ReturnsNotAccepted
  • Brand: Unbranded

    Description

    PROS:
    Absolutely no cartridge chips are needed and all inks show 100% all the time :-)
    Buy ink at more reasonable prices
    No more cartridge chip errors.
    No more check sum errors.
    No more cartridge's showing empty!
    No permanent modifications to your machine. If you want to return your machine to factory operation then simply reverse the installation process.
    CONS:
    You have to monitor ink levels yourself.  I recommend cutting 2/3 of the lid off for direct viewing (see pic). When the bag gets low, I like to place the bottom of the bag under the rubber band (see pic). Doing so helps with using all the ink and reminds me to keep an eye on it.
    INSTALLATION INSTRUCTIONS:
    1. Shutdown the RI3000 or RI6000
    2. Remove the black metal covers from the right side (if yours has them)
    3. Unplug ribbon cable from both ink controller cards and tie up with a rubber band leaving the end connector exposed
    4. Plug the end connector into the short ribbon cable from the Chip Eliminator
    5. Plug the remaining long cable from the Chip Eliminator into the ink controller cards
    6. Replace the black metal covers (if desired)
    7. Turn on RI3000/RI6000 and Enjoy!
    IMMEDIATE PAYMENT REQUIRED.
    WE SHIP WORLD WIDE FROM THE USA TO THE EBAY VERIFIED ADDRESS ONLY.