WSDM-80C PVC ID cards 80C 80 Convex Manual PVC ID Credit Card

Description

template
Szwter
PVC ID cards 80C 80 C
onvex
Manual PVC ID Credit Card Embossing & Indenting Embosser  Machine
Note: the machine ,haven't  concave word function, if you need to print the  concave word of the credit card, please choose  Add pay 0
WSDM—80C model
：
Applies workpiece:
Normative PVC card, That be 85.5mm × 55mm
2. Main Technical Parameters
Applies workpiece: N
ormative PVC card, That be 85.5mm × 55mm
1.   Character-selection: character rosette turnplate
2.   Adopting ISO international credit card special character.
3.   2 gears for word spacing gap
1/7inch
1/10inch（only for small characters）
4.   Operation mode：manual
5.   Raised type lines
：
1-11
lines
6.   Raised type location indication：
indicator
or sample card
Model
Brand
characters
Size (mm)
weight
（
kg）
WSDM-80C
WONDER
Internal 80 code characters:
Capitalization & Lower case of English letters (52): A~Z
Capitalization & Lower Arabic numerals (20):0~9
Small symbols (4):
＆‵
–
／
Large symbols (2):
－∕
Modify splanishing symbols(2):
■
■
Machine size（L×D×H）：340×300×180
Packs size（L×D×H）：
410×350×255
Net weight：8.8
Packs weight：10.5
Manual code printer (imprinter) is the essential equipment of PVC card’s post  production and processing. Its function is to extrude protruding or receding  characters to make PVC card with identifiability and uniqueness.
Our “wonder” series PVC manual code printer owns reliable structure, accurate  position, small volume, beautiful appearance and easy operation, which is  applicable to the small batch and many varieties cards’ manufacturing for small  stores, showbiz, food centers, stock exchange centers, banks and insurance etc.
Manual card embossing & Indent machine is the  necessary equipment at the end of the process of producing PVC card, this  device, which is used to press out the outstanding letter of alphabet and  numerals on the surface of PVC card, makes PVC card to be identified or  exclusive.
The manual and electric type of the machine on the market is two kinds of,  Manual machine is cheaper and easier to use, so medium and small companies of  producing card use it.
PVC manual embossing machine has characteristics of reliable structure, accurate  orientation, small bulk, laconic exterior and convenient operation.
PVC Card Embosser is the necessary equipment at the end of the process of  producing PVC card, which is perfect for personalization of your VIP cards, club  cards, membership Cards, gift cards etc. It makes PVC cards identified or  exclusive by printing convex characters on them.
This Manual PVC Card Embosser Machine we offer has the characteristics of heavy  duty reliable structure, accurate orientation, small volume, beautiful  appearanceand convenient operation. Compared with electric embossing machines,  this manual machine is more economical and better suited for small batch or  personalization jobs.
4. Use of  the Machine
A
、
Preparation  Work
1.   Insert  the handle (5) into the axle hole in the right of the machine, and screw on the  fastening screw (6).
2.   Pull the card framework (4) to the  outermost, and put in the required card sample as needed.
3.   Insert lean the card to be imprinted into the metal  slot in the front-end of the card framework, gently push ahead, and press down  the card to put in the metal slot in the front-end of the card framework.
B
、
Row  Spacing Selection
According  to different models, there are 1/7inch, 1/10inch and 1/12inch to choose for the  transverse pitch among the imprinted characters, the selection of the character  transverse pitch can be finished by turning the word spacing adjusting knob (7).  1/7inch position is the large character spacing; 1/10inch is the small character  spacing; 1/12inch is italics spacing (these spacing is available only in concave  code printer and Embossing & concave code printer models.).When uses the  Embossing & concave code printer molding machine, needs to choose when 1/7inch  and the 1/12inch character is apart from the gap, must first the character  distance adjust Niu (7) to change 1/7inch and inch 1/10,or the 1/12 inch place,  then instigates in front of the machine the side character to be apart from the  adjustment to dial the change-over switch (8) to choose 1/7 inch and 1/10 inch  or the 1/12 inch character is apart from the gap.The fore-and-aft distance uses  the fixed gap, each gap is tooth /20inch, may gently on rollers card frame (4)  choice. It can use the fixed gap for the longitudinal separation, 1/20inch for  each gap, pull and push the card framework (4) to select.
C
、
word-selection  positioning coding
1. Turn the code-selection plate (1),  and turn the required imprinted character to the character pointer (2).
2. Gently push and pull the card  framework (4) for the up-down position-selection of the card.
3. For the left-right selection of the card, move right can  be finished by directly gently the framework (4); move left, you can gently  depress the handle (5) (about at 15 degree), then reset, and the framework (4)  can move one space left; after the above operations, the card can be set in the  imprinted position.
4. The card imprinting is taken from  left to right, it will automatically move one space left after each character is  imprinted; press 3 for the blank.
5. Imprint the character: to operate the  handle (5), push to down, and then reset.
6. If the imprinted character may be  deeper or shallower, undesirable, then it can be adjusted by adjusting screw in  the regulating port located in the bottom of the machine.
Regulation means: use the Z outside-hexagonal spanner along  with the code sprinter to a little loose the hold-down nut, and then  inside-hexagonal spanner with the code sprinter to adjust the middle regulating  screw. Attention: turning the regulating screw in clockwise may deepen the typed  characters while clockwise turning may lighten the typed characters. After  finishing, please use the inside-hexagonal spanner with the code sprinter to  make the regulating screw stable, and then use the Z outside-hexagonal spanner  to fasten the hold-down screw.
D. Error  Correction
If you need  modify the characters, you can select
■
or
■
to modify according to the concrete requirements.
When  modifying the small character, please use
■
to press small characters flat.
When  modifying the large character, please use
■
to press largely characters flat.
Same  operations to the coding methods, after smoothing, impress the required  character again in the original position.
5.  Considerations
1.Be  sure to take great care of the pointing position of the row spacing ruler (2)  when you beating code onto the cards. forbid press the handle(5) when the  instructed region is not in the effectual region in order to avoid the stencil-piate  to be damaged.
2.When you rotate the code disk.don`t press down the handle(5) for the fear of  damaging the machine.
3.  When you want to shifts the gears position, please note the exact orientation,  if in the midway needs to replace, please use the left hand to block the card
Framework(4)
gently, in order to keep it in the time of  conversion neutral card
Framework
(4) without moving;
4.  Forbid strictlys hand or in other foreign matter insertion machine accidentally;  strictly prohibit work without card on the machine .
5.  When the machine is out of use, please move the card
Framework
(4) to the end of leftmost .
1.Your valid phone number is  very necessary for the shipping, otherwise we can't guarantee that  the package would safely arrives.
2. Any Customs tax applied to this package should be covered by  buyers.
What in  Package:
1 x PVC Card
convex
Embossing Machine
1 x Punch Handle
1 x Sample PVC Card
1 x Set of Hardware
1 x User's Manual
Payment
1. Payment methods  accepted :
Paypal
only
.
2. Payment must be  received within 7  business days of  auction closing.
Shipping
1. We ship your  orders within 1-2  business days after  the payment  received.
2. Item shipped via  Singapore Post or  HongKong Post , It  takes about 7-14  business days (USA,CA,AU,UK).others  country 10-20  business  days(Brzil,India,RU),Exact  delivery time  depends on postal  process.
3. If you do not  receive your item(s)  by 30 business  days,Please feel  free to contact us  via ebay mail system  , we will try our  very best to resolve  any problems with  you
Return Policy
1. Return is  accepted within 14  days after the  buyer's receiving  the item.
2. If this item is  defective upon  receipt, customer  has up to 14 days  from date of receipt  for exchange of a  new one.
3. Unused/unopened  merchandise will be  fully credited.
Other Policies
We are not  responsible for any  custom duty or  import tax.
If you need we write  low price on  shipping bill, pls  leave message when  you make payment .
All emails will be  answered within 24  hours. If you do not  receive our reply,  please kindly  re-sent your email  and we will reply to  you as soon as  possible, Suggest  send eBay message to  us, That is easy to  find .